1.刀口型直尺:knife straigjht edge
2.刀口尺: knife straigjht edge
3.三棱尺three edges straigjht edge
4.四棱尺four edges straigjht edge
5.條式和框式水平儀 bar form and square levels
6.合像水平儀 imaging level meter
7鑄鐵平板 cast iron surface plate
8.巖石平板 granite surface plate
9.鑄鐵平尺cast iron straigjht edge
10.鋼平尺和巖石平尺 steel and granite straigjht edge
11.圓度儀 roundness measuring instrument
12.電子水平儀electronic level meter
13.表面粗糙度比較樣塊鑄造表面 roughness comparison specimens cast surface
14.表面粗糙度比較樣塊磨、車、銑、插及刨加工表面 roughness comparison specimens-ground,turned,bored,milled,shape and planed
15.表面粗糙度比較樣塊電火花加工表面 roughness comparison specimens spark-erostion machining surfaces
16.表面粗糙度比較樣塊拋光加工表面 roughness comparison specimens pollshed surfaces
17.接觸式儀器的標稱特性
18.輪廓profiles
19.軌跡輪廓 traced profile
20.基準輪廓 reference profile
21.總輪廓 total profile
22.原始輪廓 primary profile
23.殘余輪廓residual profile
24.觸針式儀器stylus instrument
25.感應位移數字存儲觸針式量儀displacement sensitive,digitally storing stylus instrument
26.觸針式儀器的部件stylus instrument components
27.測量環measurement loop
28.導向基準renfence guide
29.驅動器 drive unit
30.測頭(傳感器) probe(pick-up)
31.拾取單元 tracing element
32.針尖 stylus tip
33.轉換器 transducer
34.放大器 amplifier
35.模/數轉換器analog-to-digital converter
36.數據輸入data input
37.數據輸出data output
38.輪廓濾波和評定profile filtering and evaluation
39.輪廓記錄器profile recorder
40.儀器的計量特性metrological characteristics of the instrument
41.靜測力的變化change of static measuring force
42.靜態測力 static measuring force
43.動態測量力 dynamic measuring force
44.滯后 hysteresis
45.測頭的測量范圍 transmission function for the sine waves
46.儀器的測量范圍measuring range of the instrument
47.模數轉換器的量化步距quantization step of the ADC
48.儀器分辨力 instrument resolution
49.量程分辨力比range-to-resolution ratio
50.測頭線性偏差probe linearity deviation
51.短波傳輸界限short-wave transmission limitation
52.輪廓垂直成分傳輸 vertical profile component transmission1
53表面粗糙度比較樣塊拋丸、噴砂加工表面 roughness comparison specimens shot blasted and blasted surfaces
54產品結構幾何量計術規范（GPS）geometrical product specifications(GPS)
55表面結構 surface texture
56接觸式儀器的標稱特性 nominal characteristics of contact instruments
57公法線千分尺micrometer for mearsuring root tangent lenghths of gear teeth
58最大允許誤差 maximum permissible error
59圓柱直齒漸開線花鍵量規 gauges for straight cylindrical involute splines
60齒厚游標卡尺 Gear tooth vernier calipers
61齒輪漸開線樣板the involute master of gear
62齒輪螺旋線樣板 the helix master of gear
63矩形花鍵量規 gauges for straight –sided splines
64測量蝸桿 master worm
65萬能測齒儀 universal gear measuring instrument
66萬能漸開線檢查儀universal involute measuring instrument
67齒輪齒距測量儀gear circular pictch|<< << < >>