DL/T531-1994(2005復審)

電站高溫高壓截止閥、閘閥技術條件

　

GB/T11689-1989

船用法蘭鑄鋼截止閥(四進位)

Marine cast steel flanged stop valves

GB/T12235-1989

通用閥門法蘭連接鋼制截止閥和升降式止回閥

General purpose industrial valves—Flanged steel globe valves and lift check valves

GB/T12233-1989

通用閥門鐵制截止閥與升降式止回閥

General purpose industrial valves—Casting iron globe valves and lift check valves

GB/T1951-1984

船用低壓外螺紋青銅截止閥

Marine low pressure bronze male threaded stop valves

GB/T2499-1993

船用法蘭鑄鐵雙排截止閥箱

Marine cast iron flange dual-row stop valves-case

GB/T590-1993

船用法蘭鑄鐵截止閥

Marine cast iron flanged stop valves

GB/T594-1983

船用外螺紋鍛鋼截止閥

Marine forged steel male thread stop valves

GB/T584-1999

船用法蘭鑄鋼截止閥

Marine cast steel flanged stop valves

GB/T595-1983

船用外螺紋青銅截止閥

Marine bronze male thread stop valves

GB/T587-1993

船用法蘭青銅截止閥

Marine bronze flanged stop valves

JB/T7245-1994

制冷裝置用截止閥

　

JB/T7747-1995

針形截止閥

　

JB/T9081-1999

空氣分離設備用低溫截止閥和節流閥技術條件

　

JB/T53165-1999

高壓平衡截止閥 產品質量分等

　

JB/T53174-1999

截止閥 產品質量分等

　

JB/T53155-1999

空氣分離設備用低溫截止閥和節流閥 產品質量分等

　

JB/T8859-2004

截止閥 靜壓壽命試驗規程

　

HG/T3215-1986

聚三氟氯乙烯塑料襯里截止閥

　

NF E29-350-2003

工業用閥.鋼制球閥、球狀截止閥和止回閥

(Industrial valves - Steel globe and globe stop and check valves.)

NF P43-001-2000

建筑物用閥門.建筑物中供應引用水用銅合金截止閥.試驗和要求

(Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements.)

NF D36-380-2001

燃氣燃燒器和燃氣用具用自動截止閥的閥門檢驗系統

(Valve proving systems for automatic shut-off valves for gas burners and gas appliances.)

NF A84-621-2002

氣焊設備.焊接、切割和相關工藝用帶截止閥的速動連接

(Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes.)

NF M88-771-1975

液化烴容器裝置.手動截止閥.制造.功能.試驗

(LIQUEFIED HYDROCARBON INSTALLATIONS IN CONTAINERS. MANUALLY CONTROLLED STOP VALVE. CONSTRUCTION. OPERATION. TESTS.)

NF P43-002-1981

建筑物水管閥門.水表截止閥.一般技術規范

(VALVES AND TAPS FOR WATER SUPPLY IN BUILDINGS. STOP VALVES FOR METER. GENERAL TECHNICAL SPECIFICATIONS.)

BS EN 13709-2003

工業用閥.鋼制球閥、球狀截止閥和止回閥

(Industrial valves - Steel globe and globe stop and check valves)

BS 1552-1995

一類、二類和三類燃氣用手動截止閥規范

(Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar)

BS 7461-1991

帶有流量調節器、閉路開關指示、閉合位置指示器開關或氣流量控制的電動自動氣體截止閥規范

(Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control)

BS 1010-2-1973

給排水設施用排放旋塞和截止(旋壓式)閥規范.第2部分:排放旋塞和地面上用截止閥

(Specification for draw-off taps and stopvalves for water services (screw-down pattern) - Draw-off taps and above-ground stopvalves)

BS 1873-1975

石油、石油化學及有關工業用鋼球形閥、球形截止閥與單向閥(有法蘭及對接焊端)規范

(Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries)

BS 3457-1973

水龍頭與截止閥座墊圈材料規范

(Specification for materials for water tap and stopvalve seat washers)

DIN 4817-1-1981

液態氣的截止閥.概念.安全技術要求.檢驗.標志

(Shut off valves for liquefied gases; definitions, requirement, testing, marking)

DIN 86251-1998

造船用鑄鐵制帶法蘭的DN15至500的截止閥

(Shutt off valves for shipboard use, of cast iron, with flanges, DN 15 to 500)

DIN 86260-1998

造船用炮銅制帶法蘭DN15至500的截止閥

(Shutt off valves for shipboard use, of gun metall, with flanges, DN 15 to 500)

DIN 85003-4-1997

造船用管件的交貨技術條件.第4部分:截止閥

(Technical specifications for valves for shipboard use - Part 4: Stop valves)

DIN 85003-6-1997

造船用管件的交貨技術條件.第6部分:手動截止閥

(Technical specifications for valves for shipboard use -Part 6: Hand operated gate valves)

DIN 3399-1986

低壓截止閥.安全技術要求和檢驗

(Gas low-pressure cut-off valves; safety requirements, testing)

DIN 3160-1974

公稱壓力25的冷卻劑循環直通截止閥

(Through-valves for refrigerant circuits, nominal pressure 25 bar)

DIN 3161-1974

公稱壓力25的冷卻劑循環角形截止閥

(Elbow valves for refrigerant circuits; nominal pressure 25 bar)

DIN 4056-1992

水管.街道地下截止閥門的路蓋.DVGW技術規范

(Water pipelines; valve boxes for stop valves; DVGW code of practice)

DIN EN 1643-2001

燃氣燃燒器和燃氣用具用自動截止閥的閥門檢驗系統

(Valve proving systems for automatic shut-off valves for gas burners and gas appliances; German version EN 1643:2000)

DIN 86500-1968

船用螺紋連接的截止閥和閘閥等概述

(Valves and Gate Valves with Screwed Connections; Survey of Types for Shipbuilding)

DIN 86254-2000

船只及造船技術.超輕型截止閥DN32-DN125(PN10)

(Ships and marine technology - Shut off valves extra light duty DN 32 to DN 125, PN 10)

DIN EN 13709-2003

工業用閥.鋼制球閥、球狀截止閥和止回閥

(Industrial valves - Steel globe and globe stop and check valves; German version EN 13709:2002)

DIN EN 1213-1999

建筑閥門.建筑物中飲用水供應用銅合金截止閥.試驗和要求

(Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements; German version EN 1213:1999)

DIN 86266-2002

船舶和航海技術.用手夾緊和法蘭連接的超輕型法蘭的截止閥

(Ships and marine technology - Butterfly valves for flanges extra light duty wafer type and flanged type - DN 50 to DN 125, PN 10)

GB/T1856-1993

船用法蘭鑄鐵單排排出截止閥箱

Marine flanged cast iron single arrangement exhaust stop box valve

GB/T1854-1993

船用法蘭鑄鐵單排吸入截止閥箱

Marine flanged cast iron single arrangement suction stop box valve

JIS B8605-2002

致冷裝置的截止閥

(Stop valves for refrigerants)

JIS F7379-1996

造船.卡套式30K黃銅截止閥

(Shipbuilding -- Brass 30K stop valves with bite joint(s))

JIS E4103-1988

鐵路車輛用截止閥

(Cut-out cocks for railway rolling stock)

JIS E4114-1989

鐵路車輛用青銅截止閥

(Bronze stop valves for railway rolling stock)

QB/T3880-1999

衛生潔具、暖氣直角式截止閥技術條件

Technical requirements for sanitariness ware and heating angle valve

QB/T3881-1999

衛生潔具、暖氣直角式截止閥型式和尺寸

Shapes and dimensions of sanitariness ware and heating angle valve

JB/T10530-2005

氧氣用截止閥